Blog

What Are the Types of Hydraulic Fittings?

XCD

1. NPTF taper thread joint  

Note: This is a dry sealing thread; It is a domestic taper pipe thread for conveying fuel, which can be used for both external thread end joints and internal thread end joints. NPTF external thread can be matched with NPTF, NPSF, or NPSM internal thread. NPTF pipe joint is similar to BSPT pipe joint, but it can not be exchanged with each other. The pitch of most threads is different and the profile angle is 60 °, while the profile angle of BSPT thread is 55 °.  

 

2. Jic37 ° taper angle internal thread joint  

Note: 37 ° cone angle (JIC) society of Automotive Engineers (SAE) stipulates that 37 ° cone angle or cone seat can be used for the high-pressure hydraulic pipeline. This type of pipe joint is usually called JIC pipe joint. JIC external thread is a straight thread, which can only be matched with JIC internal thread. JIC external thread is a straight thread with a 37 ° conical seating surface, and JIC internal thread is also a straight thread with a 37 ° conical seating surface. The seal is formed at the 37 ° cone seat surface. The threads of some sizes are the same as sae45 ° cone angle threads. The cone angle should be carefully measured to distinguish.

 

3.Sae45 ° taper angle external thread joint  

Note: SAE (45 ° cone angle) is a term used for pipe joints with a 45 ° cone angle or cone seat. This joint is usually used for soft copper pipes because the material is easy to machine into a 45 ° angle. This coupling is suitable for low pressure applications - such as fuel lines and refrigeration lines. Sae45 ° taper angle external thread can only be matched with sae45 ° taper angle internal thread. SAE external thread is straight and has a 45 ° conical seating surface. The SAE internal thread is also a straight thread and has a 45 ° conical seating surface. The seal is formed at the 45 ° conical seating surface. Threads of some sizes are the same as sea37 ° taper threads. The cone angle shall be carefully measured for zone alignment.

 

4. O-ring face seal external thread joint  

Note: the external thread of the O-ring end seal can only match with the internal thread of the O-ring end seal. The external thread is a straight thread with O-ring; The internal thread is a straight thread with a sealing end face, the external thread is sealed at the O-ring, and the internal thread is sealed at the sealing end face.

 

5.O-ring flange-SAEJ518  

Note: SAEJ518 sae61 and 62 four-bolt split flanges are generally widely used to connect pumps and motors all over the world.   

There are three exceptions; 

A.The multiplication factor is - 10, which is not the SAE standard size, but it is widely used outside North America 

B.Caterpillar flange has a thick flange head (dimension "C" in the table), and its outer diameter is the same as that of the sae62 flange.   

diaphragm

C. POCLAIN flange, which is fundamentally different from SAE flange

 

6. O-ring plane seal fixed external thread joint  

Note: when the O-ring on the external thread joint is in contact with the plane on the internal thread joint, it forms a seal. In the hydraulic system, an elastomer seal can be used to control the leakage, and this kind of pipe joint can be used when the anti-leakage function is very important.  

 

7. Jacketed pipe joint  

Note: the compression sleeve fixed external thread joint can only be matched with the compression sleeve internal thread nut and compression sleeve. The external thread joint is the straight thread with a 24 ° cone seat. The internal thread head is a straight thread with a pressure sleeve as a sealing surface. The seal is formed between the pressure sleeve and the 24 ° cone seat of the external thread joint, and between the pressure sleeve and the inner pipe of the internal thread joint.

 

Your Trusted Hydraulic Fittings Manufacturer

No matter what type of hydraulic hose connector you need? You can find it in XCD. We are a professional manufacturer and supplier of hydraulic fittings. Can provide you with a large number of hydraulic accessories. If you have requirements in this regard, you can click here to view our hydraulic hose fittings.

0 Comments
Leave a Comment
Your email address will not be published. Required fields are marked *
Submit Comment
Contact Us Now
No. 25, Yiwu City, Huashan Second Road, Jimo District, Qingdao City, Shandong Province, China
You can trust us
We are a professional Hose Fitting Manufacturer in China, and we are constantly innovating so that our customers can have better products and services.
© 2021XCD Inc.    RELATED ARTICLES    SiteMap.html    SiteMap.xml    Terms of Service      Privacy Policy
Marketing Support by Globalsir
Enter your inquiry details, We will reply you in 24 hours.
Name can't be empty
E-mail can't be empty
Company can't be empty
Phone can't be empty
Products can't be empty
Message can't be empty
Verification code error
code
Refill